-
netCDF support
does, or will, Geosoft support import/export of netCDF files?
-
Can a Voxel 3D model be intercepted with drillings?
I'm trying to get a new column in my drilling database. This column is for data from voxel 3d model for example: What I want is Hole ID / from / to / lithology / magnetic susceptibility / NEW DATA FROM VOXEL MODEL Currently I have everything except the DATA FROM VOXEL MODEL. I really appreciate if someone can help me 😀
-
Python Error: module 'numpy' has no attribute 'float'
Hi All, I'm trying to get data from a database using GX Developer Python API. Whatever I do, I keep getting the following error NumPy downgrading to 1.20 doesn't help. Any ideas about what could be wrong?
-
What is the difference between xy-shear stress and Max. shear stress?
I must calculate shear stresses at different time instants in QUAKE/W. There are two options to calculate shear stresses. 1. Under total stresses, there is an option called xy-shear stress and 2. under shear stresses, max. shear stresses. The results of both for a particular node are different. What are the calculation…
-
What is best tutorial for creating a factual data only cross section
I need to simply project all available subsurface information onto a nominated cross section illustrating typical drill hole geology, SPT data some CPT outputs in addition to the surface scanned topography. I ONLY want our factual data as captured in OpenGround and DONT want to show interpreted data (ie the modelled…
-
error: "invalid point index in tri"
When importing a mesh I received the following error: import failed: The VULCAN file Geo_401_DG3.00t could not be imported as a mesh: invalid point index in tri I've imported other meshes for the same project and they were all fine. I've tried removing intersecting volumes and removing verticle edges - but the error…
-
CANNOT INSTALL OASIS MONTAJ 8.4 ON WINDOWS 11
I have been trying to install an Oasis Montaj Desktop Application on Windows 11. Anytime I run the installer, the interface that pops up just stays blank and never installs. I have tried troubleshooter and tried running in compatibility mode and also ran it as an administrator but same issue persist.
-
Seequent Connector installation error
Hi All Amm trying to install Seequent Connector but am getting the attached error. I can neither install Geosoft Viewer. Anyone know what could be the problem? Regards Mwape
-
Vertical exaggeration in Seep/W
Hello everyone, I am working on a model that is roughly 10km wide but only covers 200m in height. After constructing the mesh, I vertically exaggerated the model by factor 15 before running it, to make adjustments and visualisation easier. Now the questions came up, if the vertical exaggeration is purely optical in nature…
-
Leapfrog Viewer for iPads
Not sure if this will ever be developed, but having Leapfrog Viewer on an iPad would amazing, I wonder if this is in the plans for future releases… but would certainly be amazing. I´m fairly sure that the most recent models have more than enough computing power to run something like that.
-
geosoft filters
i am a dissertation student.my topic is ground water prospecting from hard rock terrain(deccan trap gujarat) using AEM method.so i am using geosoft for data processing.so i want know about that the computational part behind RTP, DRTP, apparent susceptibility calculation filter.why we are using this filters and what is the…
-
Internal Error message
Hi, has anyone ever seen this issue before? it is an internal error message I get every time I open Oasis Montaj and now some extensions are crashing
-
Status update VOXI 2.5D Time Domain EM
Hi, Is VOXI 2.5D Time Domain EM now out of development and officially released? If not, is there a timeline? Cheers, Neil
-
Leapfrog Geo: Is there a way to export specific/filtered drillhole intercepts to DXF?
I know that there is a workaround to export traces via Exporting and Importing OMFs but that does not work when I just want to export certain intercepts (e.g drillholes with assay grades greater than a cutoff ) Thanks in advance!
-
What is the best way to model a fold in Leapfrog Geo
Am trying to model a Fold which includes multiple lithologies (Sediments and volcanics) and haven´t get yet with the best tool in Leapfrog Geo to do it, could it be planar structural data? as a surface? with point or polylines?
-
Balanced Shapes using the Intrusion Tool
What methods do folks find best to generate "balanced shapes" when using the Intrusion tool. An example being a narrow Intrusion shape (with an 65deg inclined structural trend applied) that has a limiting exterior point on one side from an adjacent drillhole, but unconstrained on the other side. Left to run freely the…
-
Has anyone face an error while trying to update the geological model extent?
I am following the Leapfrog Geothermal online self learning course, and while trying to update the geological model extent, I encountered this error: RBF fitter reached internal max iteration count does anyone knows how to fix this one?
-
What is the best way to get a list of all elements in a Leapfrog project?
Is there an easy way to get a list of every object/item in a project? Ideally it would be broken down in a format similar to the project tree but even a basic list would do. Does anyone have any solutions or tips? Thanks
-
The block model data in（.mdl）format is imported into the Leapfrog software
-
LF Works - Structural Data Mislabelled in Section
I am trying to label structural data in a section, and adding labels to them based on both dip/dip direction and also a column value. After adding them to the section and checking "Show dip/dip direction', they correctly display that information. However, when I also show labels for a column value (in this case Structure…
-
Importing surfaces from Petrel to Leapfrog Geo.
Hello, I have been working on petrel in a geological model and have exported the interpeted sufaces as ZMAP or CPS-3 or IRAP classic grids, and none of hem works to import those surfaces into the leapfrog project. Any recommendations on how to import those surfaces?
-
Sequent Connector Certificate
Hi All, I'm running Leapfrog or the first time on this machine and this is the error message i get when i try to access the connector. Can anyone help?
-
Points projection to the same plane
What is the best way to keep distance between specific points in a projection that are on the same surface or plane
-
Empty pinch out in vein model
I have copied a vein model and changed the litho code. The new boundary has been created assuming it would automatically generate the vein to the new area. But it is not happening and I notice that the pinch outs is empty and seems to be generating vein some place else.
-
Geosoft Target Tutorial Manual
Dear All Does anyone know where I can download the Target tutorial manual? Please help Regards Mwape