-
Moved: "Show text" when displaying hex color of borehole
This discussion has been moved.
-
Moved: Why can't I see my query filters?
This discussion has been moved.
-
Moved: Contour generation from output volume
This discussion has been moved.
-
Moved: numeric models from drillholes information
This discussion has been moved.
-
Moved: Leapfrog Geo: Convert Polyline / String File to Multiple Deviation Hole
This discussion has been moved.
-
Leapfrog geo : extraction of zone less then and greater than certain value from Volume
can we filter blocks in leapfrog based on their depth to glacial till between 25 to 35 m? in the volume or in model. This would make calculation very limited to these blocks and would give us the 25-35 m depth to glacial till boundary required for my mapping purpose.
-
Numeric Model - RBF interpolant trouble
Hey there, I'm trying to make an extrapolation from fracture data in geothermal wells.The problem is when I load my point data this is upside down in the Z axis in the drillhole data and the numeric model isn't consistent. I'd thank some help or if you can sugest a different approach for this problem Note: I'm a beginner…
-
What's the best way to create polylines for selected lines only
Dear all, I have a shapefile for multiple fault traces. I want to extract those traces to individual polylines for fault modeling. I know I can delete useless polylines after I extract the entire file to polyline, or I can save individual lines by edit shapefile. However, both ways are very time-consuming. Is there an…
-
Any good way to model the looped fault junction?
Dear all, Is there any way that I can map a fault system that has multiple faults terminating on each other? I think Leapfrog Geo can only let older fault terminate on younger fault? Please see the following figure. In this case, I have faults that were terminating on each other, based on previous mapping. I cannot model…
-
Numeric Composite Sum of Variable
Does anyone have a workflow to sum a variable when making a numeric composite. The numeric composite give the average over the interval however, I have a variable that I want the sum over the interval.Thanks
-
Obtaining values along the wellbore with the desired sampling step
Hello! I have the following question. There is a set of boreholes, in each of the boreholes at a distance of 25 meters obtained values of uniaxial compression strength. Based on these data, a three-dimensional model is built. How to use this model to get the values of strength along the boreholes with a step of 1 meter?…
-
Slice "Wall" blocking cross section
Hey team. I've got something weird showing up when I cut a slice. There is a shadow "wall" or something blocking the cross section view. I have a few different borehole data sets in the model, and the wall only shows up when a certain borehole geology or collar is turned on. Anyone seen something like this? Is there…
-
numeric data offset
How do I offset my downhole numeric data bar graph outwards from the drillhole trace line? I can do it on scene view by clicking on graphs but on section layout view I can't. Can you help?
-
Moved: Intrusion with structural trend processing time
This discussion has been moved.
-
Can I select polylines without clicking one by one?
Hi, I was working with polylines that were created from polyline shapefile. I want to delete polylines in different part for controlling of different geological units. However, I have to click the polylines one by one. Is there any way that I can simply select an area and delete all the polylines within? In addition, I was…
-
Thrurst/reverse faults in Geo...
Faults tool in Geo is a great one, but trying to model a reverse fault is alwas a time-consuming task; on the other hand, most of the times (depending on data and drilling angles and distribution) normal faults causes the limits of solids between fault block them look as reverse faults. Is there a plan in future releases…
-
Windows 11 and Leapfrog
Is anyone out there running Leapfrog on a Windows 11 machine? If so, are you experiencing any problems or is it running fine? I am in the market for a new machine and am limited b/c most machines come with Win11 as the OS. Thanks
-
Smart refresh with acQuire
Hi everyone, I have a problem when I use the "smart refresh" tool. Each time it ask me to reload all my drillholes (6659 holes), but only a few holes have been added to my project. At the end of the reloading data he say this: "Smart Refresh has not detected any table structure changes. Would you like to import all tables…
-
Moved: Lidar to Topography
This discussion has been moved.
-
PDF
How can I import and georeference PDF files
-
Leapfrog Geo 2021.2.5 performance
Has anyone else using the latest version of Geo (2021.2.5) noticed a downgrade in performance? On a newly created project I'm experiencing considerably longer process times for basic tasks such as new model setup, interval selections and vein model updates than I was getting for the same data in previous versions on the…
-
Slicer width increases and objects fuzzy become when displaying downhole graphs
In LF Geo, when adding downhole graphs to the scene when sliced, the slicer width increases and objects being displayed become fuzzy. Apparently this may be due to very large scene extents which occurs when displaying graphs, even though there are no objects causing the extents to increase.
-
How to change the coordinates of a model
Hi, a customer would like our exported IFC data of the geological models to be in a different location. Originally the coordination point was at x=0 and y=0. These should now be moved with an offset of x=3488500 and y=5474000. This is not a problem for the designs or borehole data, but is it possible to move the geological…
-
Is ”Screens table” needed for defining boundary conditions in TOUGH model?
hello I'm studying how to use Leapfrog as a preprocessor for TOUGH3. I don't know how to enter parameters such as steam production from the well, reinjection to the well, inflow and outflow of heat or hot water. According to Leapfrog's manual, we can define such parameters by adding a Generator. Also, the manual says: If…
-
How to reload appended drillholes?
Hi there, I have a drillholes database for which I have appended another set of drillholes. I want to updates all the drillholes. When I select the Reload Drillholes options, LF Geo prompts me to the links to the original database but not to the appended one. How do I make sure those last ones get updated too? Thanks for…