-
Moved: Thickness Grid option not showing?
This discussion has been moved.
-
Moved: Folded surface from a single polyline?
This discussion has been moved.
-
Moved: Leapfrog Edge - Better than Vulcan for Resource Estimation?
This discussion has been moved.
-
Moved: unable to import gbn
This discussion has been moved.
-
Moved: Importing cross sections into LF geothermal
This discussion has been moved.
-
Moved: Virtual Machine - LF Geo & Edge
This discussion has been moved.
-
Moved: Borehole labels for Cross Section
This discussion has been moved.
-
Moved: Up Holes vs Down holes (Dip)
This discussion has been moved.
-
Moved: Export a Geologic Map as DXF
This discussion has been moved.
-
Moved: Borehole water tables (points) in cross section layout
This discussion has been moved.
-
The old my.leapfrog3d.com forum was so much better.
It had to be said. Cheers, Ramón.
-
creating finite faults
I'm trying to create a finite fault for my geological model, but no matter what I do Leapfrog extends the fault all the way out to my GM boundaries. I created my fault by drawing a polyline (to the correct length) but then when the GM creates it as a fault plane, it suddenly extends out. The only YouTube help there is, is…
-
Moved: Enhancements to Geo
This discussion has been moved.
-
Display 2D GM-SYS profiles in 3D (Fence diagram)
Hi, I have a number of 2D GM-SYS gravity profiles, some of which cross eachother. I'd like to display them all in 3D so the spatial relationship between them can be seen, as a fence diagram, like this: Can Oasis do that? I can extract horizons to geostring and display that, but that just outlines every block in a single…
-
Moved: MVI Vectors - viewing
This discussion has been moved.
-
Moved: Text for points not displaying / seems linked to camera view???
This discussion has been moved.
-
Moved: Developing an open pit quarry for Leapfrog Geo
This discussion has been moved.
-
Operations on large grids
Hi, I'm struggling to perform grid operations in Oasis Montaj (initial pre-process ahead of FFT using MAGMAP). My grid is about 100k x 80k cells. I get an error suggesting the largest allowable grid dimension is 65536 (2^16). Does anyone know if there's a way to change the maximum size in Oasis Montaj? Cheers
-
Moved: Tiff image
This discussion has been moved.
-
Dynamically link Planned Drillholes to a mesh/output volume
Hi all, Is there a way to dynamically link planned drill holes to a mesh so that every time the mesh is updated the target depths of the planned drill holes are updated as well? I have a lot of planned drill holes that target a particular mesh which is regularly updated. It gets quite tedious to re-adjust the planned drill…
-
Variable Orientation - Interpolation or NN?
Hey guys. I was checking the variable orientation results in a project with multiple surfaces as input for the VO. It seemed that the dip/azi values are interpolated between inputs and I confirmed with a test. As an example below (image 1), I wanted vertical/subvertical directions but LF creates a middle region with…
-
GX Developer Guide
For further information & documentation for the Geosoft GX Developer API, you can visit the GX Developer Wiki,
-
Load to leapfrog model .geosoft_voxel from geosoft
Hi, All Does anyone know how to upload a .geosoft_voxel file to leapfrog Geo?
-
GIS image draping
I am trying to drape a GeoTIFF image onto my topography. I used manual georeferencing since my image and topography have different CRS. But my image keeps tilting. The referenced points are correct but my image won't lay flat, and I have no idea why or how to fix this.
-
I need an alternative to the Geophysics levelling module for solving Block shifts visible in magdata
Is there an alternative module to the Geophysics Levelling Module in Geosoft that can be used to remove the visible block shifts in the grids. If possible please provide a link to the the modules workflow. Thank you.