-
Definition of initial moisture content
hey! I got a question for modeling transient analysis when using Seep/W and Sigma/W. I'm trying to model an embankment with a certain initial moisture content. Is there any way to define initial moisture content rather than defining only saturation state of the soil? Since I try to analyze dissipation of water through the…
-
What's the best way to create polylines for selected lines only
Dear all, I have a shapefile for multiple fault traces. I want to extract those traces to individual polylines for fault modeling. I know I can delete useless polylines after I extract the entire file to polyline, or I can save individual lines by edit shapefile. However, both ways are very time-consuming. Is there an…
-
Any good way to model the looped fault junction?
Dear all, Is there any way that I can map a fault system that has multiple faults terminating on each other? I think Leapfrog Geo can only let older fault terminate on younger fault? Please see the following figure. In this case, I have faults that were terminating on each other, based on previous mapping. I cannot model…
-
Oasis Montaj Python PIP installation
Hi, I'm trying to install pip onto geosoft nestled python; however whenever I try to do so, I get this: At which point it just goes to my desktop version of python. Any ideas on what I'm doing wrong?
-
Negative Magnetic susceptibilities
In running VOXI my models end up with some negative magnetic susceptibilities. As was mentioned previously if the RMI has any negative values then negative susceptibilities will follow. I would assume this is due to the background level shift or using the wrong value. When making diurnal, etc. corrections to a base station…
-
Looking for samples of Geosoft files please
Hello, all. I don't know if you could help. We are looking for samples of Geosoft files, with a view to identifying internal signatures for them. Could anyone point me in the direction of any map, ATT, MDF, PLT, GWS, LPT, CON, XYZ files, please?
-
Numeric Composite Sum of Variable
Does anyone have a workflow to sum a variable when making a numeric composite. The numeric composite give the average over the interval however, I have a variable that I want the sum over the interval.Thanks
-
Obtaining values along the wellbore with the desired sampling step
Hello! I have the following question. There is a set of boreholes, in each of the boreholes at a distance of 25 meters obtained values of uniaxial compression strength. Based on these data, a three-dimensional model is built. How to use this model to get the values of strength along the boreholes with a step of 1 meter?…
-
Slice "Wall" blocking cross section
Hey team. I've got something weird showing up when I cut a slice. There is a shadow "wall" or something blocking the cross section view. I have a few different borehole data sets in the model, and the wall only shows up when a certain borehole geology or collar is turned on. Anyone seen something like this? Is there…
-
numeric data offset
How do I offset my downhole numeric data bar graph outwards from the drillhole trace line? I can do it on scene view by clicking on graphs but on section layout view I can't. Can you help?
-
Moved: Intrusion with structural trend processing time
This discussion has been moved.
-
Can I select polylines without clicking one by one?
Hi, I was working with polylines that were created from polyline shapefile. I want to delete polylines in different part for controlling of different geological units. However, I have to click the polylines one by one. Is there any way that I can simply select an area and delete all the polylines within? In addition, I was…
-
Thrurst/reverse faults in Geo...
Faults tool in Geo is a great one, but trying to model a reverse fault is alwas a time-consuming task; on the other hand, most of the times (depending on data and drilling angles and distribution) normal faults causes the limits of solids between fault block them look as reverse faults. Is there a plan in future releases…
-
Displaying Grids in ArcGIS
My computer crushed, after reinstalling the operating system and ArcGIS, I can no longer display the Geosoft grids in ArcMap 10.5. I understand I can download the plugin but does anyone know the right plugin for ArcGIS 10.5 and how to activate it. Kind regards Mwape
-
Windows 11 and Leapfrog
Is anyone out there running Leapfrog on a Windows 11 machine? If so, are you experiencing any problems or is it running fine? I am in the market for a new machine and am limited b/c most machines come with Win11 as the OS. Thanks
-
Seep plugin for 2D non-Darcy flow
Hello teacher, I want to find out where can I find the non-Darcy flow plug-in in the two-dimensional case, I can't find the two-dimensional non-Darcy flow in the geostudio plug-in, thank you.
-
Moved: Geosoft montaj plugin not showing up in Arcmap
This discussion has been moved.
-
Is there an up-to-date document detailing how to apply magnetic base station corrections to surveys?
I can't seem to find a document that explains how one goes about applying a base station correction to a magnetic UAV survey. I have an excel file with raw recorded base station values and the time the values were collected (in Unix time). I also have a database with the survey data and the time of collection (also in…
-
Smart refresh with acQuire
Hi everyone, I have a problem when I use the "smart refresh" tool. Each time it ask me to reload all my drillholes (6659 holes), but only a few holes have been added to my project. At the end of the reloading data he say this: "Smart Refresh has not detected any table structure changes. Would you like to import all tables…
-
Moved: Lidar to Topography
This discussion has been moved.
-
PDF
How can I import and georeference PDF files
-
Self-Organizing Maps
Trying to get the gx for SOM to run. Followed instructions in Usage Notes & Installation Notes but got the following: "Unable to load "som_analysis.omn". The menu is either empty of you are not licensed to use this menu. I'm authorized and using OM 2022.1. Any advise would be very helpful. Thanks Bob Ellis
-
Leapfrog Geo 2021.2.5 performance
Has anyone else using the latest version of Geo (2021.2.5) noticed a downgrade in performance? On a newly created project I'm experiencing considerably longer process times for basic tasks such as new model setup, interval selections and vein model updates than I was getting for the same data in previous versions on the…
-
Slicer width increases and objects fuzzy become when displaying downhole graphs
In LF Geo, when adding downhole graphs to the scene when sliced, the slicer width increases and objects being displayed become fuzzy. Apparently this may be due to very large scene extents which occurs when displaying graphs, even though there are no objects causing the extents to increase.
-
old project review
Hello all. How can I review an old project (inputs and geometry and results)? Is it possible with a student license?