-
Como puedo quitar esos bordes de la topografia?
-
About fault
i want to know how to control fault depth and length in a model which is bigger than the fault.I have try a lot of time ,but can't solve it.
-
Geoslope E994 Convergence problem
Hello, In the case of a levee with multiple rows of anchors embedded in chalk, I perform a stability calculation by imposing a failure plane. My slope calculation does not converge (E994). I have tested different approaches: linear search and root finder. In the convergence graph, lambda never exceeds 0.2. Can it go beyond…
-
Problem with calculated dip and azimuth from alpha and beta
I have Alpha 85 and Beta 50, calculated Dip is 34.314 and azimuth 346.096 in Leapfrog But tis is not correct, the azimuth need to be 50, and dip 85. What I'm doing wrong in setting imported drillhole structural data. Or the values need to be in radians or….?
-
Leapfrog 2024.1 release - new features and enhancements to Survey Tables
Here's a quick, insightful webinar you won’t want to miss! Learn how the latest improvements to survey tables can enhance your confidence in decision-making. In just a few minutes, you’ll discover: •The importance of visualising survey data •How to quickly identify inaccuracies in drill hole paths •Ways to customise data…
-
Limited Spots - Leapfrog Geo Fundamentals (Webinar)
This instructor-led remote course will provide you with the fundamentals skills to get the most out of Leapfrog Geo. It is a hybrid offering between the content presented in our standard in-person Fundamentals and Fundamentals Plus courses. Register here now
-
Excess pore water pressure SIGMA W
Hi for All. SIGMA W visualise only total pore water pressure. How can i get and visualise the excess water pore pressure ?????
-
the method or operation is not implemented. photgraphing error?
was photographing a collection as normal, until the camera plugged in to the Imago Laptop needed it's battery replaced. and went flat. with a new battery being the only changed thing, we are now getting an error everytime we try to take a photo. the only info is that it says " the method of operation is not implemented.…
-
Leapfrog Geo Data for Training can't open in 2024.1.0
I'm trying to use the Oliver Project from Seequent to support my online training, but it doesn't update to my current version and open (image attached).Could you please help me on how to import it or even sending me the project in a version that can be opened? Thanks in advance!
-
Vein orientation error
Hello, I am being unable to process a vein because it doesnt let me flip orientation even though the hangingwall and footwall lines are correct. So I have 1 line of hangingwall as a gis object (on surface) and one for the footwall, but when I try to create a new vein in surface chronology it dips to the oposit direction,…
-
Multidialog menu
Hi all, Does anybody know how to create a multidialog menu using Python GX developer? Can't find anything about it in the API Reference. By multidialog menu I mean something like this (see image 1) instead of that (see image 2). Any clues, references or words of encouragement are much appreciated.
-
🚀 Upcoming Events! 🚀
Take your skills to the next level with our free webinars: Leapfrog Works Fundamentals: Soil Modeling (Nov 20) Register here! GeoStudio Remote: Getting Started (November) Register here! Leapfrog Works Fundamentals: Build (Nov 21) Register here! Leapfrog Works Fundamentals: Numerical (Nov 26) Register here! MX Deposit…
-
Target for ArcGIS Pro: geosoftarcpy module not found error, no tools work.
No tools work at all due to the same error: "geosoftarcpy" module not found. Is "_geosoftarcpy.cp39-win_amd64.py" the correct file name? That is the only script with a similar name as geosoftarcpy in the Target for ArcGIS Pro folder. Specifically, it is located here: C:\Program Files\Geosoft\Target for ArcGIS…
-
SEEP - Comparing groundwater scenarios, with/without excavated shaft
Hi I have created two steady-state 2d groundwater models without and with an excavation and a drainage layer. I would like to compare these and get the difference in water levels/pressure. I cant really seem to find any way to do this so I would really like to hear from the expertise here. Best regards
-
If You’re Working with Leapfrog, This Webinar on Block Model Regularisation Might Help
I wanted to share a useful webinar that I think could really help if you’re working with Leapfrog models. Erik Scheel, a Senior Project Geologist, walks through the Block Model Regularisation feature in Leapfrog 2024.1. This feature has a lot of potential for anyone looking to refine their block models, and I found the…
-
¿Es posible exportar un modelo geológico de un proyecto a otro sin convertirlo en un modelo estatic?
Tengo un modelo de alteración y otro litologico en dos proyectos separados, y quiero dejar ambos modelos en un solo proyecto. Leapfrog me permite exportar solo los solidos (dxf, msh,…), pero yo quiero que el modelo sea dinamico en el proyecto donde pretendo copiarlo. Creo que leapfrog no lo permite aun, solo he intentado…
-
Is there a limit to the number of models a surface can be applied to?
I have 11 numerical models within a project and I am trying to apply a boundary using a mesh surface to each of the models. I can add the mesh surface to the "first" 4 models, but cannot add it to additional models. Removing the mesh surface from one model allows me to add it to another, leading me to believe there is a…
-
The latest version of Leapfrog 2024.1 is now available!
We're excited to introduce the latest version of Leapfrog with new functionality and enhancements to core tools and workflows. Key improvements include: 🐸 Ability to run multiple Leapfrog instances at the same time 🐸 Support for polyline attribution 🐸 Survey data enhancements 🐸 Improvements to interval selection Click here…
-
Groundwater analytical data over time best practice
Does anyone have a best practice for how to import groundwater data that was collected over many sampling events (10+)? I am running into "Overlapping intervals" errors since I am importing all of groundwater analytical data from several events in the same table. I've included a example table of the format I am using to…
-
Reorganizing database
Hello! My current database is like this: x1 y1 z1 a1 b1 c2 d1 x2 y2 z2 a2 b2 c2 d2 x3 y3 z3 a3 b3 c3 d3 ... And I'm looking to get it into this format: x1 y1 z1 a1 x1 y1 z1 b1 x1 y1 z1 c1 x1 y1 z1 d1 x2 y2 z2 a2 x2 y2 z2 b2 x2 y2 z2 c2 x2 y2 z2 d2 x3 y3 z3 a3 x3 y3 z3 b3 x3 y3 z3 c3 x3 y3 z3 d3 ... Does anyone know of any…
-
Why my display have issue while I'm slicing ?
My layer become distorted when slicing. It's normal when i'm not slicing !
-
Import a 3D photogrammetry model into LeapFrog
I'm trying to import a 3D model from Agisoft Metashape to LF but I'm not able to see it, I've tried to import it as meshes and as a design but neither of the two I can see in the scene, can anyone help me?
-
how to combine polylines into one?
combine the two polylines into one
-
Leapfrog Geo just stall and stop processing
Hi All, Have any of you had experience when running Leapfrog and Leapfrog seems to stop even though it says processing but without that running bar? I just remove one drillhole and the task to process is 1.7K. After four hours, there is 256 tasks remaining when it stalled. I re-start, shut down my laptop but it did not…
-
Surface Contact
anyone can help, why my surface contact are skewed? why its not created as flat surface?