-
Optimal Drill Spacing for Limestone Resource Classification (Inferred vs Indicated)
Hello everyone, I am currently working on a limestone exploration permit in a sedimentary environment. Last year, we completed a first phase of test drilling on a selected reference area. We are now preparing a geophysical survey over two 1 km² blocks within a 6 km² zone of interest. After the geophysics, I plan to run a…
-
New Course Announcement: Master Your Drilling Data with Driver!
Hi Seequent Community, I'm happy to announce a new on-demand training course now available on the Seequent Learning Centre: Driver Fundamentals. For those new to it, Driver is a cloud-based application that uses machine learning for rapid exploratory data analysis of your drilling data. It's a powerful tool for discovering…
-
Accessible Learning: Leapfrog Geo Fundamentals Without Installation
Recent 5 ⭐️ review: "No software needed to explore the UI/UX!" 🧠Did you know? You don’t actually need to have Leapfrog Geo installed to take the Leapfrog Geo Fundamentals learning plan. One learner recently shared how much they appreciated being able to explore the software’s interface and functionality without ever…
-
How to add intrusion points to a vein surface?
Does anyone know why I'm getting an error message to the footwall of my vein model when I add points/vertices from an intrusion surface of another geological model? The error relates to having the same intrusion model/surface used for the boundary (lateral extent) of the vein model. Note that I can add the intrusion…
-
🚀 Leapfrog 2025.2 introduces a powerful new way to work with core imagery for clients with Imago
Now, you can stream core photos and scans directly into Leapfrog – no more importing large files or switching between apps. With Leapfrog 2025.2, you can: View imagery on demand, keeping projects lean and performance fast. See drilling intervals in context, with core imagery highlighted directly in the 3D scene. Compare…
-
Grouping Lithologies in Leapfrog - One of My Favourite Time-Saving Features
Hi everyone! 👋 I’m currently working on updating the Leapfrog Works Fundamentals learning pathway, and I wanted to take a moment to share one of my favourite features in Leapfrog - Group Lithologies. If you’ve ever worked with borehole data from historical drilling programs or recent field campaigns, you’ll know how…
-
🚨 Upcoming FREE Workshops! Oct - Dec 2025
Hi APAC community! 👋 We have a ton of FREE expert-led workshops happening between now and the end of the year, and I'd love to see you at one (or more!) of them. See what we have coming up below 👇 ⛏️ MINING: 29 Oct: Blok Model pada Leapfrog - Block Modelling in Leapfrog in Bahasa Indonesia with Ahmad Basyar (note: not…
-
How to adjust geological layer/surface to follow topography pattern
I want my geological layer/surface to follow topographic pattern/surface at locations where there is no data (borehole data)
-
🚀Leapfrog 2025.1 is finally here!
The latest versions of Leapfrog Geo, Leapfrog Works, and Leapfrog Energy are now officially available to download from MySeequent. This release is packed with updates to help you work faster, communicate more clearly, and get more from your models! 📢 Highlights include: Refreshed structural trends: Improved usability,…
-
Possible bug in Leapfrog Geo 2025.1?
Just started working with Leapfrog Geo 2025.1, is anyone else also having a problem with the slicing tool (thick slice), where it won't go any thinner than ~ 180m? Thanks in advance
-
Convert a calculated variable to a alpha / category
I am trying to apply a bench code to a block model using this function Bench = round(([zc]-[Block Model Z origin])/ [Bench Height],0)* [Bench Height] +[Block Model Z origin] Broadly the calc is doing what is needs (although not having the INT() option is a challenge) However, I need to report from the model on the Bench…
-
Postgresql ODBC connection
Can someone explain me where to find information about editing the ODBC connection to a postgresql database? Thanks!
-
What is the fastest way to import topography?
Hi all, Is there a recommendation to have a faster topography import? Assuming a similar resolution, which input is faster to import? Points Surface (as mesh) GIS Vector data Elevation grid Polylines Usually the processing get stuck for a while on the "topography interp" step. Is there one format or or the other that is…
-
Tip to prevent a fault from intersecting the boundary
I have four seams (Veins) modeled from 2D cross-sections, as shown in the attached image. In my geological model, I’ve introduced two faults: F.A and F.KT4. However, these faults do not intersect all coal seams. Specifically: Fault F.A only cuts the upper seam (Vein 1), Fault F.KT4 cuts the three lower seams (Veins 2, 3,…
-
Creating a classic strike-dip symbol in Plan View Layout
Hi everyone, I am making some plan view layouts with structural data (basically making a map) but I cannot find a way to add the classical strike and dip symbols. I have the structural data plotted, but only as single lines with no indication of the dip direction. Is there a way to do this? Many thanks
-
New Languages Available for Leapfrog Geo Fundamentals and Leapfrog Works Fundamentals Learning Paths
New to Leapfrog or need a little refresher? Our free online Leapfrog Geo Fundamentals and Leapfrog Works Fundamentals learning paths are now available in additional languages! Both learning paths are available in English, Spanish, and Portuguese, as well as Indonesian and French for Leapfrog Geo Fundamentals and Turkish…
-
Check out our Seequent Learning Centre!
Hello, I'm Darren Andrews, one of Seequent's instructional designers. In recent years, we have transformed our online training experience with the creation of the Seequent Learning Centre! It is now the place to access all of our e-learning courses and other learning material. Clicking on this link will take you there:…
-
Join Me for the ‘Unlock the Power of Ore Body Knowledge’ Workshop!
Hi everyone! 👋 I’m Stephanie, and I’m excited to invite you to a hands-on Leapfrog Geo workshop designed to help you build and refine geological models with confidence. Whether you're new to Leapfrog or looking to sharpen your skills, this session will cover essential modeling fundamentals, plus a few advanced tips and…
-
Oliver dataset
Is there possible to have this dataset in order to practice on our desktop?
-
Updated System Requirements
As the recommended system requirements haven't been updated since 2019, (when the recommended Graphics card and processor were released. Do anyone have any recommendations on the hardware for an optimal system? We are running some data heavy models which are taking days to process. I would like to build a dedicated system…
-
erosion model
I am trying to model my OB using erosion model. The output OB is not snapping the topography, although I am using topography for my litho model boundary.
-
MapInfo batch export XML format - cannot parse
Hi there, I am not a MapInfo user, but I would like to create an XML for batch import of spatial data. I have an XML that was not created by MapInfo, but rather by a standalone python code. When I try to import the XML (via , "GIS Data, Map and Photos" —> "Batch Import" —> From MapInfo" I get an error that Leapfrog Geo was…
-
The latest version of Leapfrog 2024.1 is now available!
We're excited to introduce the latest version of Leapfrog with new functionality and enhancements to core tools and workflows. Key improvements include: 🐸 Ability to run multiple Leapfrog instances at the same time 🐸 Support for polyline attribution 🐸 Survey data enhancements 🐸 Improvements to interval selection Click here…
-
Erosional (Soil) surface is extending and connecting boreholes which doesn’t have soil lithology.
So I have vertical boreholes (iron ore deposit) and top layer is soil. When creating erosional layer using the ‘erosion’ surface in Leapfrog Geo as can be seen in the Fig. 1, resulting erosional layer is extending and connecting the boreholes which don’t even have soil as layer (yellow bold dots are soil layer and…
-
Leapfrog Geo: Is there a way to export specific/filtered drillhole intercepts to DXF?
I know that there is a workaround to export traces via Exporting and Importing OMFs but that does not work when I just want to export certain intercepts (e.g drillholes with assay grades greater than a cutoff ) Thanks in advance!