-
Help on explicit modelling of geologic mapping data?
Good day! Im just a beginner in leapfrog geo and I would like some help in creating a vein model based on geologic mapping data and also the lithology model of surrounding rocks. I want to set the thickness, as well as use the strike/dip measurements of the mapped veins. Maybe someone here has a link on a tutorial on this?…
-
Catch up on our Mining Webinar Series
Looking to explore smarter, more connected ways of working across the mining lifecycle? Our 6-part mining webinar series is now available on demand, so you can catch up on any sessions you missed (or revisit them!) at your own pace. The series explores real project challenges, from exploration through to production,…
-
Help with extending my geology
I have created a geological model using solids, but the ones I was given do not extend to my weathering surface, what is the best way to go about extrapolating them up? for example here i need the green extended up to the purple and it has varying geometry, I'm really not sure how to approach this
-
What do you wish you could do when planning drillholes that you can't do today in Leapfrog?
Hi, I'm Ryan, the Product Manager for drillhole planning in Leapfrog. For those of you who tuned into our recent Leapfrog Geo Mastery Session, you will have seen the showcase of our new grid planning tool. As we continue to refine our drillhole planning capabilities, I'd love to know: What do you wish you could do when…
-
Why are my vein models curved?
I am modeling a series of dykes using Vein System, my inputs include both drillhole data and poly lines. Why are the shapes curving outwards below the last polyline? How do I prevent this? I want the models to have a relatively linear trend along the dip. Not all models in the vein system are generating this curved…
-
Leave a Leapfrog Geo Review (First 20 Receive a $50 USD Gift Card)
Hi everyone, We're bringing this one back in case you missed it the first time! If Leapfrog Geo has been helpful in your work, we'd love if you could take a few minutes to share your experience on G2. Your feedback helps other geoscientists learn from real-world users and helps us continue improving. As a thank you, we're…
-
Introducing Leapfrog 2026.1: Unrivalled Depth in Every Layer
Hi everyone 😊 I am thrilled to announce the launch of Leapfrog 2026.1 🎉This release is jam-packed with powerful new features to replace slow, manual processes with data-driven, auditable systems to help you work more efficiently, reduce manual edits, and deliver higher quality results. Key enhancements to note · Build…
-
Alpha-beta-gamma-WHAT?
A really common question we get at Seequent is about structural measurements made in drillcores. So much so, that we made a dedicated guide to using downhole structural measurements in Leapfrog. There's a couple of things to know up-top: 1 - If your drillcore isn't orientated, you cannot use the downhole structural…
-
How can I join the intrusion intervals together
Hi all, I have a small intrusion to model, but they are not joining up. the edge pretty much right next to the last drill interval. I've tried different settings but unless I assign an extreme trend they would stay patches. Anyone knows if there's a parameter that i can adjust so at least the edge would extend a bit more…
-
Interpolation Error - Unexpected internal error: Internal matrix not definite
Hi, I have a numeric model that I append to daily with new drilling data. Today I started to get this error and I'm a bit stumped as to the cause. My parameters have been pretty reliable for over a year now. I'm not seeing any glaring issues with my data either. Any ideas what could be causing this? Thanks!
-
Out with the PDF, in with the interactive ⚡New eLearning course for Vein Modelling available!
Hey everyone! 👋 Exciting news! The Vein Modelling with Leapfrog Geo PDF guide is now available as an on-demand eLearning course, designed to help you master vein modelling in Leapfrog faster. With this new hands-on format, you can: Learn by doing with interactive exercises and in-module simulations Get instant feedback…
-
Symbology of stretching lineation in Stereonet
Hello everyone, I would like to know if there is a way to have a small dash indicating the direction of the stretch for the symbol of a mineral stretch line in the steroenet diagram in LeapFrog Geo. Thank you very much in advance. Cheers.
-
Leapfrog Geo Fundamentals Learning Path for 2025.3 is Live!
The Education Elves at the Seequent Learning team have been hard at work updating content for our Leapfrog Geo Fundamentals learning path, which is now live on our learning platform! Course content has been updated with Leapfrog Geo UI and functionality for the 2025.3 version release. Check out the course here, and…
-
Modeling of pre-sedimentary faults
Hey Everyone, What is the best way to model a fault that does not affect overlying (post-fault) sediments?
-
Optimal Drill Spacing for Limestone Resource Classification (Inferred vs Indicated)
Hello everyone, I am currently working on a limestone exploration permit in a sedimentary environment. Last year, we completed a first phase of test drilling on a selected reference area. We are now preparing a geophysical survey over two 1 km² blocks within a 6 km² zone of interest. After the geophysics, I plan to run a…
-
New Course Announcement: Master Your Drilling Data with Driver!
Hi Seequent Community, I'm happy to announce a new on-demand training course now available on the Seequent Learning Centre: Driver Fundamentals. For those new to it, Driver is a cloud-based application that uses machine learning for rapid exploratory data analysis of your drilling data. It's a powerful tool for discovering…
-
Accessible Learning: Leapfrog Geo Fundamentals Without Installation
Recent 5 ⭐️ review: "No software needed to explore the UI/UX!" 🧠Did you know? You don’t actually need to have Leapfrog Geo installed to take the Leapfrog Geo Fundamentals learning plan. One learner recently shared how much they appreciated being able to explore the software’s interface and functionality without ever…
-
How to add intrusion points to a vein surface?
Does anyone know why I'm getting an error message to the footwall of my vein model when I add points/vertices from an intrusion surface of another geological model? The error relates to having the same intrusion model/surface used for the boundary (lateral extent) of the vein model. Note that I can add the intrusion…
-
Grouping Lithologies in Leapfrog - One of My Favourite Time-Saving Features
Hi everyone! 👋 I’m currently working on updating the Leapfrog Works Fundamentals learning pathway, and I wanted to take a moment to share one of my favourite features in Leapfrog - Group Lithologies. If you’ve ever worked with borehole data from historical drilling programs or recent field campaigns, you’ll know how…
-
🚀 Leapfrog 2025.2 introduces a powerful new way to work with core imagery for clients with Imago
Now, you can stream core photos and scans directly into Leapfrog – no more importing large files or switching between apps. With Leapfrog 2025.2, you can: View imagery on demand, keeping projects lean and performance fast. See drilling intervals in context, with core imagery highlighted directly in the 3D scene. Compare…
-
How to adjust geological layer/surface to follow topography pattern
I want my geological layer/surface to follow topographic pattern/surface at locations where there is no data (borehole data)
-
🚀Leapfrog 2025.1 is finally here!
The latest versions of Leapfrog Geo, Leapfrog Works, and Leapfrog Energy are now officially available to download from MySeequent. This release is packed with updates to help you work faster, communicate more clearly, and get more from your models! 📢 Highlights include: Refreshed structural trends: Improved usability,…
-
Possible bug in Leapfrog Geo 2025.1?
Just started working with Leapfrog Geo 2025.1, is anyone else also having a problem with the slicing tool (thick slice), where it won't go any thinner than ~ 180m? Thanks in advance
-
Convert a calculated variable to a alpha / category
I am trying to apply a bench code to a block model using this function Bench = round(([zc]-[Block Model Z origin])/ [Bench Height],0)* [Bench Height] +[Block Model Z origin] Broadly the calc is doing what is needs (although not having the INT() option is a challenge) However, I need to report from the model on the Bench…