-
Surface mesh extent extrapolate beyond model boundary.
Hello everyone. I am having some uncertainties about surface generation in LeapfrogWorks. In model boundary, I enclosed the object on the interval table and modified the model boundary extents for the purpose of my research. Even though I fixed up the model max and min boundary, Leapfrog is still extrapolating beyond these…
-
About texture import in Mesh
Hello, anyone know how to import textures to a mesh? Thanks
-
Evaluation against Topography
Hi everyone! Currently I'm using Leapfrog Geo/Edge for our shot term nickel operations and I would like to know if there a way to evaluate our reserves below topography, because during evaluation Leapfrog consider the total block, even the proportion of blocks that fall above topography. For operations this is important…
-
Unable to export Master Layout
Once I have created a long section in the Master Layout I am trying to export as PDF. Unlike on previous Leapfrog Works versions I have used, there is no option/icon to export in the Master Layout or in the project tree. Am I missing something..?
-
HEM data frequency domain: apparent resistivity and apparent depth calculation
Hi, I am Vikas Baranwal from Geological Survey of Norway. I am wondering if someone still using HEM data processing in Geosoft/Oasis Montaj. I will like to discuss about apparent depth and apparent resistivity calculation using table look up method. Regards Vikas
-
Diurnal Corrections
Dear all Which software is the easiest to use for diurnal corrections of the magnetic data? I have tried Gemlink not sure if am doing the right thing. Area there any softwares that are easier to use? Regards Mwape
-
Overlays/Evaluations
How might one overlay or evaluate a block model with an open pit shell (mesh)?
-
non-vertical fence sections
Is there a way to draw a non-vertical fence section? For instance, if I have two tunnels and I want to define a plane through those tunnels and evaluate geology and boreholes on that plane?
-
Constraining topmost unit without BH data
Hi, I wonder if anyone could suggest a method(s) to constrain the topmost geological unit where there is no borehole data. My problem: The model includes made ground (fill) overlying a sedimentary unit. I know from site observation that made ground does not extent past a certain boundary on site. However because the ground…
-
Collar locations plotting wrong
Is anyone else having problems loading their data into target? All my coordinate spatial references have been checked multiple times, but when I try to load collar data from a .csv, it plots them in different spots than what the attribute table says.
-
GX for marine magnetci survey
I am looking for GX for marine magnetic survey, proccessing and analysis as well as interpretation.
-
copy Calculations and Filters to text
Can all calculations and filters be selected and copied to text?
-
Can a section layout be created from a cross section image?
I created a new cross section from image using a seismic image. I want to be able to create a section layout using that cross section and have the seismic image scaled appropriately so that drill holes can be projected onto the seismic image/section layout but the seismic image doesn't show up on the layout. Is there a way…
-
How To Plot Mag Data on map in order to see if i have any gaps in the data collected
Hello All, i need to plot my mag data acquired with G882 on the map in order to see if i have any gaps based on the time and fiducials.Could uou help me? Thanks
-
2D SEG-Y Elevation Issue
Using the new Geophysics module in Leapfrog Geo I've been trying to import some 2D SEG-Y files that I have downloaded from SARIG (line 86AK-7) The profiles plot in the correct XY location however they plot well below the topographic surface. I've played around with different import parameters but the best I can get is…
-
GXPY 9.10: cannot import name 'gxapi_cy' from partially initialized module 'geosoft.gxapi'
I have been trying to get up and running with GXPY 9.10 with Conda Python 3.8.10. It works fine if I install the geosoft package from pip. But in a separate environment, if I download GXPY from GITHUB, and add it to my PYTHONPATH, I get this error when trying to `import geosoft.gxpy as gxpy`: ImportError: cannot import…
-
Is it possible to create a cubic slice?
Hi, I was wondering if there is a way to have 2 slices active at the same time, to cut a cube shape out of my ground model to show the geology in a specific area of the model. Thanks in advance
-
How to gat the sub-block index as metadata
Is there a way to get the sub-block index as metadata. When clicking on a sub-block the index appear in the info window but not as metadata.
-
Importing Sub-Block Model as Octree
We receive csv files from a consultant and they have recently started sending us unregularized block models. Using the update with the Octree import, can I import these unregularized block models into my Leapfrog EDGE? I think the only catch is the csv needs to have the block size coded along with the block centroid. I…
-
Leapfrog Error when importing MODFLOW Grid
I've been receiving the below error when trying to import an MF2K .nam file. This has worked previously. Any one had this issue?
-
Purchase a personal Target license for ArcGIS
Hello how I can purchase a program license, for personal use, as I want to train for the management of this program. The creators of ArcGIS have created more facilities to purchase licenses from different types of users, such as the personal use license, from which I have purchased one. But on the Seequent page, as much as…
-
GeoTIFF imports in 5.1 but not 6.0
This is a GeoTIFF in GDA2020 Zone 55 (EPSG: 7855). It renders perfectly in Leapfrog Geo 5.1 but appears with an error icon in 6.0 (no error is given though). These were imported by choosing "Import elevation grid..."
-
Straps on mag data
Hi, I am facing a strange phenomenon with the mag data i am acquiring. Data is acquired in parallel lines and the background noise is different following the acquisition direction. the difference is about 10nT and it is regular all over the site following North south or East-West directions. Sensors were tilted 45 degrees…
-
PhD thesis
I want to carry out a research work on the effect of noise on aeromagnetic data, ground magnetic data and electromagnetic data(TEM)...I need help on how to go about it. And can one consider these research work good for PhD thesis.
-
Exporting/Extracting Multiple Unclipped Meshes from a Geological Model
Does anyone else have this problem? I think this would be a great (and hopefully simple) change to Leapfrog Geo! Extracting or exporting multiple
unclipped surfaces from geological models. Currently to extract an unclipped
surface you have to do it individually as the "Extract clipped mesh"
tick box is only available there…