-
Leapfrog 2024.1 release - new features and enhancements to Survey Tables
Here's a quick, insightful webinar you won’t want to miss! Learn how the latest improvements to survey tables can enhance your confidence in decision-making. In just a few minutes, you’ll discover: •The importance of visualising survey data •How to quickly identify inaccuracies in drill hole paths •Ways to customise data…
-
Limited Spots - Leapfrog Geo Fundamentals (Webinar)
This instructor-led remote course will provide you with the fundamentals skills to get the most out of Leapfrog Geo. It is a hybrid offering between the content presented in our standard in-person Fundamentals and Fundamentals Plus courses. Register here now
-
The latest version of Leapfrog 2024.1 is now available!
We're excited to introduce the latest version of Leapfrog with new functionality and enhancements to core tools and workflows. Key improvements include: 🐸 Ability to run multiple Leapfrog instances at the same time 🐸 Support for polyline attribution 🐸 Survey data enhancements 🐸 Improvements to interval selection Click here…
-
3D printing geological models tips and tricks
I wanted to drive a little discussion about 3D printing your models and ideas / tips on settings and edits needed to make it work. The below picture is a vein model (or part of) that I increased the thickness on and restricted what volumes where included to make the printing go easier. Then I exported that out as a OBJ…
-
MapInfo batch export XML format - cannot parse
Hi there, I am not a MapInfo user, but I would like to create an XML for batch import of spatial data. I have an XML that was not created by MapInfo, but rather by a standalone python code. When I try to import the XML (via , "GIS Data, Map and Photos" —> "Batch Import" —> From MapInfo" I get an error that Leapfrog Geo was…
-
2d interpolation
I have data on Fe levels in boreholes. can LF interpolate 2d Fe levels in boreholes?
-
Contact Surface Values
I am building deposit surfaces in a GM and i am getting bad results (segments of drill holes not included in the surface). When I display the contact surface values, some of the drill holes do not have any points at all or have incomplete points and that is why they are not being honored by the surface (or so I think). Can…
-
How do i get LF to interpolate better between borehole points
Good Day, i have attached an image of an issue i am having with LF. I am trying to create a geological model from borehole data. I have known points however LF does not interpolate between some of these points. See blue arrow in image. I have tried adding in manual manipulations using polylines shown with the block box on…
-
How to make contour map of coal seams floor SF, roof SR if a coal seam is model using vain system?
I'm doing model of big coal deposit that has 2 main coal seams that are intercalated with a lot of clay lenses. So I did my model using Vein System. I need to make a map of total coal thickness and seam roof and floor. How Can I do that from a Vein System volume model?
-
Calculate length, area and volume of each stretch in a tunnel
Dear all, I want to know how to calculate the length, area and volume of each stretch in a combined tunnel model. In other words, how to separate each stretch by the lithology used within the model, and show (either through a table or a report) its length, area and volume. Many thanks!!
-
Select lithology colours in a combined model of a tunnel
Hi LF community, I've made a Combined Model of a twin tunnel to show the lithology inside it. The colour legend is the same as the BH's intervals. When trying to separate the tunnels to build a combined model of each one individually, the colouring of each unit is not the same as the "original" ones. Is there a possibility…
-
using one metal grade low CoG results in invalid value of other metal when reporting MRE
In the mineralization domain, there are Au, and Cu. Here I use eq(Cu+Au) to act as cut-off grade (CoG) to do Mineral Resource Estimation. eqCuAu means Cu +equvalent to Cu from Au when using CoG=0%, there are invalid in Cu grade and contained Cu; when using CoG=0.2%, there are still some invalid in Cu grade and contained…
-
Convert AGD84 to GDA94 easting/northing
Does anyone know the easiest way to convert from the AGD84 to GDA94 coordinate system? I registered my maps and cross-sections in Leapfrog under the AGD84 system, then exported them and uploaded them into a GDA94 system, but they still don’t align correctly. Any advice on what might be causing the issue or how to resolve…
-
Accumulated length
Hey there, Anyone knows how can I create an accumulate length or a total length for different units for drillholes, using Leapfrog Geo or Edge? Thanks