-
Clipping Geologic Model
How would I clip my geologic model visually, but retain all of the data outside of the clipped extent?
-
Updated System Requirements
As the recommended system requirements haven't been updated since 2019, (when the recommended Graphics card and processor were released. Do anyone have any recommendations on the hardware for an optimal system? We are running some data heavy models which are taking days to process. I would like to build a dedicated system…
-
Take Your 3D Geological Modelling to the Next Level
📢 Hey geologists! Why not start the year by boosting your 3D geological modelling skills? Whether you’re a beginner or looking to refine your expertise, we’ve got training options for everyone. 💻 Why Leapfrog Geo? It’s the go-to tool for organizations worldwide—now’s your chance to see what the buzz is all about! 📅 Ready…
-
Erosional (Soil) surface is extending and connecting boreholes which doesn’t have soil lithology.
So I have vertical boreholes (iron ore deposit) and top layer is soil. When creating erosional layer using the ‘erosion’ surface in Leapfrog Geo as can be seen in the Fig. 1, resulting erosional layer is extending and connecting the boreholes which don’t even have soil as layer (yellow bold dots are soil layer and…
-
Leapfrog Works: How to limit the extent of a deposit from offset surface, using polylines
Hi there I want to create a thin superificial deposit and thought that this is best done by a "New deposit" or "New erosion"… "From offset surface", using the topography. This gives me a surface layer which extends along the complete topography. But I want it to be present only in some areas and I have polylines which give…
-
Leapfrog generating "open" volumes for some units in the Geological model
Leapfrog calculates zero volumes for several units marked by an exclamation mark in the project tree and by "false" closed status in the properties. All these units display as expected in the 3D scene view. I.e. they are far from having zero volume in reality. Also, they are surrounded by units for which the volumes were…
-
Public Group for Collaboration
We welcome and encourage our wonderful Seequent community to contribute and collaborate on public models and stereonets using the Visible Geology application. Join the group on Visible Geology using this code: Group-R24hJMtkrUkPAeqjtqzEb8 to view the read only models. If you would like to contribute work, you can submit a…
-
Balanced Shapes using the Intrusion Tool
What methods do folks find best to generate "balanced shapes" when using the Intrusion tool. An example being a narrow Intrusion shape (with an 65deg inclined structural trend applied) that has a limiting exterior point on one side from an adjacent drillhole, but unconstrained on the other side. Left to run freely the…
-
How can i edit blank spaces in a volume of a geological model?
I created a geological model from meshes that i created from a set of xyz points. Because they did not have the same distance between them, there are some blank spaces in the volume that was created like the one on the picture and in the limits of each unit: How can i fixed that?
-
Creating 3D models from a map - no other data
Hi, I am new to Leapfrog Geo. I am wanting to create a 3D model from a cross section and a plane view map. I have georeferenced these images but not sure how to define lithologies from the maps (I have created a legend) and create 3D volumes purely from the maps. Any suggestions on my possible workflow? Thanks :)
-
Control on the type of displacement of fault
Hello all, I have 2 faults (non intersecting) in a single model. How I control the displacement of the veins, like 1 will be strike-slip another normal.
-
How to join two different geological models
I am using Deswik Mapping, and I want to export the contacts to create a small geological model; then, I want to join with the Main Geological Model to update it.
-
How to change the coordinates of a model
Hi, a customer would like our exported IFC data of the geological models to be in a different location. Originally the coordination point was at x=0 and y=0. These should now be moved with an offset of x=3488500 and y=5474000. This is not a problem for the designs or borehole data, but is it possible to move the geological…
-
What's your best workflow for digitizing plan view geology from 2D section using drilling data?
I think the title is descriptive. I am trying to 1) Digitize section geology including lithology, faults, and alteration shells (not sure if I should use GeoStrings or figure out how to get PLY files to work). 2) Use my section geology (various dips) to quickly and effectively digitize plan-view geology. I have tried using…
-
Intrusion Variogram - Derive Variance
When modeling intrusions and employing the variography, there is a "variance" reported at the top - how is this variance calculated? The data to model my intrusion is categorical so where numbers are coming is a mystery. My only guess it is something to do with the interval lengths?
-
Surface mesh extent extrapolate beyond model boundary.
Hello everyone. I am having some uncertainties about surface generation in LeapfrogWorks. In model boundary, I enclosed the object on the interval table and modified the model boundary extents for the purpose of my research. Even though I fixed up the model max and min boundary, Leapfrog is still extrapolating beyond these…