-
rotating hole id text
Is it possible to plot collar ID/hole ID at an angle so long collar ID's dont plot over each other.
-
Cross Section Page size: How to add page size presets to the list.
11x17 inch is a standard page size for figures in the US. How can I add a preset to the page size list?
-
How to Import/Save custom layer cross sections
I've created custom hatching to approximate USCS symbols for about 10 soil types to show up on boreholes in a cross section. I can't set hatches in the project tree, so I set them up in the Borehole Colourings Options in the Cross Section Layout. * It was pretty time consuming to set them up, how can I save these to use on…
-
Vulcan to Leapfrog Workflow
Hi, I am looking to replicate a Vulcan model in Leapfrog. In order not to ruffle any feathers, I need the new Leapfrog model to be very much like the Vulcan wireframe. Any pointers?
-
My slicer never matches the required slice width
-
Surface mesh extent extrapolate beyond model boundary.
Hello everyone. I am having some uncertainties about surface generation in LeapfrogWorks. In model boundary, I enclosed the object on the interval table and modified the model boundary extents for the purpose of my research. Even though I fixed up the model max and min boundary, Leapfrog is still extrapolating beyond these…
-
About texture import in Mesh
Hello, anyone know how to import textures to a mesh? Thanks
-
Evaluation against Topography
Hi everyone! Currently I'm using Leapfrog Geo/Edge for our shot term nickel operations and I would like to know if there a way to evaluate our reserves below topography, because during evaluation Leapfrog consider the total block, even the proportion of blocks that fall above topography. For operations this is important…
-
Unable to export Master Layout
Once I have created a long section in the Master Layout I am trying to export as PDF. Unlike on previous Leapfrog Works versions I have used, there is no option/icon to export in the Master Layout or in the project tree. Am I missing something..?
-
Moved: Overlays/Evaluations
This discussion has been moved.
-
non-vertical fence sections
Is there a way to draw a non-vertical fence section? For instance, if I have two tunnels and I want to define a plane through those tunnels and evaluate geology and boreholes on that plane?
-
Constraining topmost unit without BH data
Hi, I wonder if anyone could suggest a method(s) to constrain the topmost geological unit where there is no borehole data. My problem: The model includes made ground (fill) overlying a sedimentary unit. I know from site observation that made ground does not extent past a certain boundary on site. However because the ground…
-
Can a section layout be created from a cross section image?
I created a new cross section from image using a seismic image. I want to be able to create a section layout using that cross section and have the seismic image scaled appropriately so that drill holes can be projected onto the seismic image/section layout but the seismic image doesn't show up on the layout. Is there a way…
-
2D SEG-Y Elevation Issue
Using the new Geophysics module in Leapfrog Geo I've been trying to import some 2D SEG-Y files that I have downloaded from SARIG (line 86AK-7) The profiles plot in the correct XY location however they plot well below the topographic surface. I've played around with different import parameters but the best I can get is…
-
Is it possible to create a cubic slice?
Hi, I was wondering if there is a way to have 2 slices active at the same time, to cut a cube shape out of my ground model to show the geology in a specific area of the model. Thanks in advance
-
How to gat the sub-block index as metadata
Is there a way to get the sub-block index as metadata. When clicking on a sub-block the index appear in the info window but not as metadata.
-
Importing Sub-Block Model as Octree
We receive csv files from a consultant and they have recently started sending us unregularized block models. Using the update with the Octree import, can I import these unregularized block models into my Leapfrog EDGE? I think the only catch is the csv needs to have the block size coded along with the block centroid. I…
-
Leapfrog Error when importing MODFLOW Grid
I've been receiving the below error when trying to import an MF2K .nam file. This has worked previously. Any one had this issue?
-
GeoTIFF imports in 5.1 but not 6.0
This is a GeoTIFF in GDA2020 Zone 55 (EPSG: 7855). It renders perfectly in Leapfrog Geo 5.1 but appears with an error icon in 6.0 (no error is given though). These were imported by choosing "Import elevation grid..."
-
Exporting/Extracting Multiple Unclipped Meshes from a Geological Model
Does anyone else have this problem? I think this would be a great (and hopefully simple) change to Leapfrog Geo! Extracting or exporting multiple
unclipped surfaces from geological models. Currently to extract an unclipped
surface you have to do it individually as the "Extract clipped mesh"
tick box is only available there…
-
Borehole Collar File Not Showing up
Hi I have imported topography and all was fine. I built a collar file and interval file in the same coordinate system as the topography and my collar file will not display any data in the scene. Thoughts?
-
ESRI Geodatabase Bugs
Good day, I am experiencing bug on Leapfrog Geo 6.0.5 regarding with the data imported from geodatabase of ArcGIS Pro 2.7.3 where the the 'Date' attribute shows [Empty] even when in the attribute table the data was imported. See the attached image below: I also cannot use queries on the database using the 'Date' attribute…
-
Bulk export younger surface vertices from GMs?
Is there a way to get the younger surface vertices from GM output volumes easily? Due to circumstances out of my control, I need to export the vertices of the younger surfaces of output volumes from my geological model. Right now I do this in two steps for each surface: extract younger surface mesh, then extract vertices.…
-
Reverse polarity of a surface
Creating a model in Geo, used a surface as a lateral extent, however my inside/outside seems to be the wrong way. How do I change polarity of the surface?
-
pdf report as attribute
Dear Leapfrog community,I am very happy being able to set volume attributes to my geological model in Leapfrog Works. However, I am confronted to the question concerning using the Leapfrog model as a comprehensive geological database. Is it possible to attach pdf reports (drilling core profiles, lab tests,…