-
How can i change the number of decimal places on an entry in my legend on a section?
I'm creating a cross section with a block model of a mag survey (discrete colourmap). My values are all quite small (3 decimal places) but the legend on the section will only display whole numbers. I can't see where I can add decimal places. Thanks for any help!
-
Limited Spots - Leapfrog Geo Fundamentals (Webinar)
This instructor-led remote course will provide you with the fundamentals skills to get the most out of Leapfrog Geo. It is a hybrid offering between the content presented in our standard in-person Fundamentals and Fundamentals Plus courses. Register here now
-
The latest version of Leapfrog 2024.1 is now available!
We're excited to introduce the latest version of Leapfrog with new functionality and enhancements to core tools and workflows. Key improvements include: 🐸 Ability to run multiple Leapfrog instances at the same time 🐸 Support for polyline attribution 🐸 Survey data enhancements 🐸 Improvements to interval selection Click here…
-
Leapfrog training data in Spanish
I have started Leapfrog Fundamentals course in Spanish, but don't seem to be able to download Oliver project data for Spanish version - anybody had same problem? Should I just proceed with the files from English course? Thank you
-
Empty pinch out in vein model
I have copied a vein model and changed the litho code. The new boundary has been created assuming it would automatically generate the vein to the new area. But it is not happening and I notice that the pinch outs is empty and seems to be generating vein some place else.
-
Export drill hole trace from Leapfrog Geo
Hi, is anyone knows how to export traces of drill hole from Leapfrog Geo ? I need Shapefile or DXF or equivalent. regards
-
How to export filtered planned holes
Hi there, Is there a way that I can only export the filtered planned hole instead of unticking all the unnecessary holes? Thanks.
-
Scene not displaying parts of surfaces
I'm working on the Oliver Training Project as part of Leapfrog Geo Fundamentals course. I've successfully created erosion and vein surfaces however the intrusion and deposit surfaces don't display on the scene, they get cut off part of the way through. Slicing isn't the problem. I've tried troubleshooting to the best of my…
-
Geological model volumes not snapping to borehole data
I am producing a geological model using borehole data, however some of the units will not snap to the data even though 'snap to data' is selected. Is there any workaround to this issue?
-
How to add a mesh to my cross-section?
Hi there. In older versions of Leapfrog Geo I was able to add meshes to the cross-sections I created fairly intuitively, now (6.0.3) I'm stumped. How can I add meshes to my cross-section layout? No models appear as options (despite having Geological Models in my project), nor do surfaces or lines (again, I have these in my…
-
Merged Table: Interval Selection Corrupt
I have an interval selection that is part of a merged table. The merged table utilizes Lithology, Samples and other static tables that have been imported from csv files. If I remove one of the imported csv static tables, my interval selection becomse corrupt. Where there was once continuous intervals, there is now random…
-
Control on the type of displacement of fault
Hello all, I have 2 faults (non intersecting) in a single model. How I control the displacement of the veins, like 1 will be strike-slip another normal.
-
Calculating distances between point data and closest mesh surface
Hello community, I'm looking to batch calculate the minimum distances (in metres) between interval/point data points and a 3D mesh layer. I have access to Leapfrog EDGE to use the Estimator functionalities but haven't found an optimal solution yet. I want to generate polylines between each sample point and the closest mesh…
-
Creating a gram meter plot (grade*true thickness) long section (2D)
When I was
in Uni as an MSc. student, a long section gram meter plot of the mineralization
very common for geological study. The gram meter value equals the true
thickness of the ore body in meters (see fig below) multiplied by the grade in
ppm from the same sample point in the lode. The long section requires the…
-
Numeric Model - RBF interpolant trouble
Hey there, I'm trying to make an extrapolation from fracture data in geothermal wells.The problem is when I load my point data this is upside down in the Z axis in the drillhole data and the numeric model isn't consistent. I'd thank some help or if you can sugest a different approach for this problem Note: I'm a beginner…
-
Why my surfaces are not consistent with the volumes I create with them?
I am building a geological model from Drillhole data, the geothermal wells have its lithology defined but the volumes are not consistent with any surface. I don't know if I'm missing something or I'm doin it wrong. I'll thank any help.
-
Como crear el modelo geologico si tengo las mesh de todas las litologias
Tengo las meshes de las litologias y quisiera crear el modelo geologico.
-
Edge License Required to View a Block Model
Hello everyone, I just installed the latest Leapfrog GEO version (2021.2.3) and became aware of a new update in this version that people with a GEO license checked out CANNOT view a block model created with Leapfrog Edge even if the model has completely run and nothing is pending. Previously, anyone with a GEO license…
-
Leapfrog 2021.2.3 Software Update: Geo, Edge, Works & Geothermal
Before installing the software update, please ensure your projects are
backed up. Please
install Leapfrog Geo 2021.2.3 as soon as possible to resolve an issue with
Interval Selection (IS) created off grouped columns, as well as other minor
issues. With
this point release, we’ve invested extra time and resources in…
-
USING AN IMPORTED LEAPFROG MESH TO BUILD GEOLOGY - IS IT POSSIBLE
I was wondering whether anyone has tried and successfully accomplished using a mesh built outside of a geological model to build a confining volume to clip veins within an intrusive. I built an intrusive in one model and exported the final surface as a Leapfrog mesh. I had built a series of sheeted veins in a separate…
-
Leapfrog geo 2021 or viewer??
I downloaded leapfrog geo, but when I open it, I get that it is leapfrog viewer, how do I download or open leapfrog geo correctly?
-
Improve acQuire conexion
Hello community The reason for my question is to know if there is a way or some extra configuration to speed up the connection with acQuire. The connection I currently have is slow, and the information reload times range from 1 hour 30 minutes to 3 hours. The connection I have to SQL is fast, but leapfrog sometimes takes…
-
Leapfrog Geo Fundamentals Missing Assay/Numeric Interpolation Section Prior to Unit 10
I will preface this by stating that I had attempted to submit a support ticket in order to assist/resolve this issue, but ran into an "Unexpected Error" and no ticket is visible regarding it. So I push it here for anyone else also learning or updating their skills with 2021.1 Fundamentals Course: While following the…
-
Exporting/Extracting Multiple Unclipped Meshes from a Geological Model
Does anyone else have this problem? I think this would be a great (and hopefully simple) change to Leapfrog Geo! Extracting or exporting multiple
unclipped surfaces from geological models. Currently to extract an unclipped
surface you have to do it individually as the "Extract clipped mesh"
tick box is only available there…