-
Shaded relief question
I want to enhance some directional trending on a potential field map. I am using Grid Shaded Relief utility. I have displayed the grid_s.grd only and I see that surface reflectance coefficients vary from 0.8 to 0.9. According with HELP it means that the image surface almost completely faces the light source. Nevertheless…
-
Geosoft Customer Success Webinar - Get Better UXO Results - Tips, Tools & Workflows
Get Better UXO Results - Tips, Tools and Workflows to Enhance Your Projects Wednesday, February 21st, 2018 10:00 AM - 11:00 AM EST Join us for Geosoft’s Customer Success webinar series. In this complimentary webinar you will learn tips about the Geosoft Oasis montaj extensions: UXO Land, UXO Marine and UX-Analyze.…
-
TGDG Presents: The Saramacca Gold Deposit – A New Orogenic Gold Discovery in the Guiana Shield
On Tuesday, February 20, 2018 from 4:00pm - 5:00pm Toronto EST, the Toronto Geological Discussion Group will be hosting a presentation by Craig MacDougall, Senior Vice President - Exploration, IAMGOLD, on the Saramacca gold deposit located in the Republic of Suriname, South America, 100 kilometres southwest of the capital…
-
satellite Gravity data
Hello, I would like to ask about a website where i can download a satellite gravity data ?
-
QCSurveyPlan_DU
gx developer used to have a gx called QCSurveyPlan_DU. apparently it is not avaiable in compiler vrsion 9.1. What is the equivalent in version 9.1 ?
-
qcplan
In earlier versions of oasis, the flight planning gx was called qcplan. in the later versions it apparently disappeard. what is the gx called now that does about the same thing ?
-
Any chance of getting UXO on Virtual Classroom?
That would be great!!!!!!!!!!
-
digitizing layers from seismic line to be inserted into GM-Sys2D
I would like to digitize layers from seismic line to be inserted into Time-section (GMS-2D) in order to invert gravity data using the help of seismic. I could insert the seismic line as image in time-section but can not digitize the layers.
-
merging two aeromagnetic surveys in various directions
I have two aeromagnetic surveys for one area. The first survey is in EW direction and the second one is in NW direction. when merging them all in one map, still see boundaries between the two surveys. see the attached files. I did mosaic them but still seeing the boundaries.
-
Power spectrum of DEMs
Dear community, is there a way to calculate the power spectrum of a 2D grid/1D profile in order to get an overview of the wavelength Distribution, e.g. in the topography? I am aware of the Radially Averaged Power Spectrum Option in MAGMAP for depth-to-basement estimates but this does not help here. Cheers, Martin
-
Download Montaj 8.1
Anyone knows where I can download the installer for Montaj 8.1? Software Updates go back to version 8.3 only. Thanks, Fabio
-
VOXI IP - RIP (reconnnaissance IP) data
Has anyone attempted to invert/model RIP data? Specifically RIP data that uses the checkerboard layout; i.e. receiver stations located on a grid say 1 km spacing, as opposed to the wagon wheel layout first utilized and modeled by Kennecott and Gerry Hohmann. I am about to attempt this with a data set...and I am wondering…
-
GX Developer 9.3.1 is now available
GX Developer support for Geosoft Desktop 9.3.1 is now available. See Release Notes for information about what is new. Notable is support for voxels and surfaces in Python. To upgrade: pip install geosoft --upgrade
-
Interpolation data of section Oasis
Good day. As we know in the Target ArcGis, when we create section we can use assay data for getting grid interpolation interval data Can i do it in the target or Oasis And can I get coordinates of assay of drill holes x,y,z in the Target and Oasis. Thank you for your advice
-
Are there ways to streamline de-duplication of targets picked, extract peak to peak values, etc?
These questions were asked via email. I'm sharing them here in case others have similar questions. Are there any ways to streamline the de-duplication of targets picked, extract Peak-to-Peak values, etc? Also some info on the picking dipoles function would be interesting. How this operates compared to say Blakeley, and…
-
Webinar: Case study of 3D potential-field modelling to help evaluate a geothermal prospect
Case study of 3D potential-field modelling to help evaluate a geothermal prospect A challenging, data-rich, GM-SYS 3D modelling study WEBINAR | Thursday, January 25, 2018 |11am - 12pm EST/Toronto (GMT/UTC - 05:00) Click here to learn more and to register Register to attend online and/or to receive the recording. Gerry…
-
Geosoft Customer Success Webinar - The Science Behind Euler Deconvolution
The Science Behind Euler Deconvolution – How it Affects UXO Depth and Weight Estimation Wednesday, November 15, 2017 10:00 AM - 11:00 AM EST Join us for Geosoft’s Customer Success webinar series. In this complimentary webinar you will learn best practices for using Euler Deconvolution as an interpretive technique for UXO…
-
I am trying to install geosoft version 9.3.1 by running the file Geosoft 9.3 Setup 126 20
I get the attached window which remains frozen.What could be wrong?
-
Grid stitching
Please help stitch two grids not overlapping. I tried Gridknit within Geosoft's but failed. Apparently it can only work if the two grids overlap
-
Dynamic change dip and azimuth drill hole in the 3D window
Good day. Can I change dynamically dip , length and azimuth drill hole in the 3D window targer arcgis ? Thank you for your advice.
-
TGDG Presents: Exploration Geochemistry from Anomalies to Footprinting
On Tuesday, January 9, 2018 from 4:00pm - 5:00pm Toronto EST, the Toronto Geological Discussion Group will be hosting a presentation by Réjean Girard, President of IOS Services Geoscientifiques Inc, on exploration geochemistry from anomalies to footprinting. Click here to learn more or to register.
-
TGDG Presents: Creating a Microbial Toolbox for the Mining Industry
On Tuesday, January 23, 2018 from 4:00pm - 5:00pm Toronto EST, the Toronto Geological Discussion Group will be hosting a presentation by Dr. Lesley Warren, Claudette MacKay-Lassonde Chair in Mineral Engineering in the Department of Civil and Mineral Engineering at the University of Toronto. The talk will focus on how the…
-
UX-Analyze v9.3 is now DAGCAP approved
Oasis montaj and UX-Analyze v9.3 have been approved as per the DoD Environmental Data Quality Workgroup DAGCAP policy for AGC Software Validation. This release, v9.3 of UX-Analyze includes the new static master database to help you track visits to flags during the survey; updated support for the Geometrics MetalMapper 2x2…
-
Voxels just got a whole lot smoother in 9.3
With the click of a button we've added Voxel smoothing to 9.3. Instead of the blocky cubes you're used to, the smoothing option turns your voxels into something sleek and more realistic looking. See the difference it makes to your interpretations immediately! Before: After:
-
how to save map view to preserve map layer attribute settings
I'm looking for a way to save my 2D Map view such that all my map layer attributes (eg colour, line thickness etc) are saved. I wish to have several saved views with different attribute settings that I can reload .